12.5" 5.56 NATO Midlength Complete AR-15 Upper Receiver Group

12.5” 5.56 Mid Length Barrel w/NP3 Barrel Extension

Our 12.5" Mid Length Barrel is designed with a taper profile for better balance and performance. The Chamber area has more mass to support with heat absorption during heavy fire while keeping weight centered to the AR-15. The taper leads to a light front end for better handling and a well-balanced AR-15 even when used with modern accessories such as suppressors, lights and night vision/IR devices. 

• 5.56 NATO
• Mid Length Gas System
• 4150 CrMoV
• 1/8 Twist
• 1/2x28
• .750 Gas Block Journal, Dimpled
• Gas Port Tuned For Supressed or Un-Supressed with Brass Ammunition
• QPQ Nitride Finish
• NP3 M4 Feed Ramp Barrel Extension
• 25.05oz

Super Duty - 5.56 Bolt Carrier Group

To improve gas efficiency, each gas key is hand flattened to true the surface. Furthermore, each carrier has a gasket hand applied between the gas key and the carrier. Gas key is torqued to spec using OCKS (Optimized Carrier Key Screw) and properly staked.

• Full-Auto M16 profile Carrier: 8620 Steel Manganese Phosphate Finish/Hard Chrome Lined For Corrosion Resistance
• Bolt: 158 Carpenter Steel, Shot peened, Individually high pressure/proof tested and individually magnetic particle inspected 
• Extractor: 4340 with Sprinco 5-Coil Heavy Duty Extractor Spring
• Ejector: S7 with Sprinco Enhanced Ejector Spring
• Gas Key: 4130 Hand Flattened To True The Surface With OCKS(Optimized Carrier Key Screw)
• Cam Pin: 4340 Forward Marked For Consistent Orientation To Reduce Wear And Improve Life Of Bolt
• Firing Pin: 8640 Steel With Hard Chrome Plating

Midwest Industries 11.5" Combat Handguard

• 6061 Type 3 Hard Coat Anodized
• 4140 Heat Treated Barrel Nut
• 4140 Heat Treated Torque Plate
• Continuous MIL-STD 1913 Picatinny Top Rail
• Two Integral Anti-Rotation QD Sling Sockets
• Seven Side M-Lok
• 5-Slot Polymer M-Lok rail included
• 9.4 oz

CMT 11.5" HDM Handguard

• 6000 Series Extruded Aluminum Type 3 Hard Coat Anodized
• 7075 Type 3 Hard Coat Anodized Barrel Nut
• 17-4 PH Cored Stainless Steel Rail Mounting Hardware
• M-Lok at All 7 Flat Sides
• 10.7 oz

Forward Controls Design 11.5" RHF

• 6000 Series Extruded Aluminum Type 3 Hard Coat Anodized
• 7075 Type 3 Hard Coat Anodized Barrel Nut
• 17-4 PH Cored Stainless Steel Rail Mounting Hardware
• Continuous MIL-STD 1913 Picatinny Top Rail
• M-Lok at 3, 6, and 9 O'clock
• Classic Round Shape Cooling Vents
• 9.25 oz

5.56 Forged Upper

• Forge Mark From US Forges
• 7075-T6 Type 3 Hard Coat Anodized
• M4 Feedramp

100% Made in USA

All NFA Rules and Regulations Apply